Search found 134 matches
Re: P300MMX?
You might want to fix your quotes. :) I think +300MHz and good overclocking improvements are entirely reasonable for the Ryzen refresh, agreed. Motherboard updates (software and hardware) should also help current Ryzen hit its peak; RAM support is spotty. Windows 10 also needs updated multi-threadin...
Re: P300MMX?
Edit : And then I posted my entire reply, re-read your post, and realized you said "Ryzen refresh ". My, that's some tasty raw egg on my face. :) Keeping post for posterity and info. :) I am hoping that the first Ryzen refresh will give me around that 6700's performance in this emulator I...
Re: Ryzen
There's a good video by Gamers Nexus explaining differences in reviews. Or at least, it seems like a good one to me - I'm not a reviewer, and I don't have any inside information. AMD Ryzen was overhyped by a lot of people, IMO. What we got with the R7's seems reasonable. Very reasonable, in fact; 8...
Re: Ryzen
There's a good video by Gamers Nexus explaining differences in reviews. Or at least, it seems like a good one to me - I'm not a reviewer, and I don't have any inside information. AMD Ryzen was overhyped by a lot of people, IMO. What we got with the R7's seems reasonable. Very reasonable, in fact; 8-...
- Wed 01 Mar, 2017 4:11 am
- Forum: Development
- Topic: PCem build guide
- Replies: 46
- Views: 52829
Re: PCem build guide
I haven't gone off and done any real research, but I haven't run into any common compression format that 7-zip won't open, so it's pretty much my go-to for that.dreamer wrote:I use 7-zip, it opens lzma fine
For Linux, it's command-line only, though.
- Tue 21 Feb, 2017 10:25 pm
- Forum: Development
- Topic: 3DFX compatibility list
- Replies: 99
- Views: 157861
Re: 3DFX compatibility list
Update: Installed and drove around a bit with 3Dfx, 640x480 only. No problems detected.A. Naim wrote:Interstate '76 Nitro - Clicked on "3Dfx" on the startup screen, and immediate Crash to Desktop.
What info do you need, and how would I get it?
- Sun 19 Feb, 2017 7:16 pm
- Forum: General
- Topic: v12 released!
- Replies: 34
- Views: 30424
Re: v12 released!
Thank you.
- Sun 19 Feb, 2017 7:10 pm
- Forum: Development
- Topic: Dynamic recompiler
- Replies: 164
- Views: 150477
Re: Dynamic recompiler
That is what I meant, although not what I literally, semantically said.SarahWalker wrote:Voodoo threads can be added, it's just that there's currently no point in doing so.
- Tue 14 Feb, 2017 7:55 am
- Forum: Development
- Topic: Dynamic recompiler
- Replies: 164
- Views: 150477
Re: Dynamic recompiler
CPU emulation takes ~90% of the main thread. Voodoo threads will run up to 100% utilisation each. Potentially increasing the number of Voodoo threads would improve peak Voodoo performance, but given that the current CPU emulation can't drive the existing Voodoo emulation at 100% it would be somewha...
- Mon 13 Feb, 2017 3:52 pm
- Forum: Development
- Topic: Dynamic recompiler
- Replies: 164
- Views: 150477
Re: Dynamic recompiler
As for AMD core counts, a few recent AMD Ryzen leaks strongly imply that the consumer CPUs may actually have twice as many cores (4 core i3-equivalents, 8-core i5 equivalents, 8-core 16-thread i7-equivalents). So I could be wrong there. But, like any pre-release, pre-actual-product-review pie-in-th...
- Mon 13 Feb, 2017 9:14 am
- Forum: Development
- Topic: Dynamic recompiler
- Replies: 164
- Views: 150477
Re: Dynamic recompiler
As for AMD core counts, a few recent AMD Ryzen leaks strongly imply that the consumer CPUs may actually have twice as many cores (4 core i3-equivalents, 8-core i5 equivalents, 8-core 16-thread i7-equivalents). So I could be wrong there. But, like any pre-release, pre-actual-product-review pie-in-the...
- Mon 06 Feb, 2017 9:06 pm
- Forum: Development
- Topic: Dynamic recompiler
- Replies: 164
- Views: 150477
Re: Dynamic recompiler
Dreamer , you are right, and it will be massive task to rewrite all components, but it will take much less if only one PC will be changed , and only one Dispaly, sound adapter etc. not the whole PCem but only one complete PC with specific boards. still a lot of work. without voodoo emulation it cou...
- Tue 17 Jan, 2017 7:49 pm
- Forum: General
- Topic: Unknown register write in CMDFIFO mode 00003d18 00000280 error when trying to run a game
- Replies: 9
- Views: 8101
Re: Unknown register write in CMDFIFO mode 00003d18 00000280 error when trying to run a game
The Voodoo2 DirectX 7 Beta driver obviously requires a DirectX version of at least 7.0. DirectX 6 isn't going to cut it. i had already installed dx 7.but it was on top of dx 4 and 6. i uninstalled them and reinstalled just 7 and it now works Old un/installers could be pretty bad. In the *Win95 days...
- Sat 07 Jan, 2017 9:04 pm
- Forum: General
- Topic: [Bug?] Win98 not accepting ANY serial keys.
- Replies: 5
- Views: 4824
Re: [Bug?] Win98 not accepting ANY serial keys.
Tried like, 6. Used physical disc and ISO. Tried different ISOs. No dice anywhere. Is there something i'm missing or something? The "stupid questions" first: Is your capslock on? Second: Can you type the key correctly in a text document? (is your keyboard working?) Both answers are probab...
- Thu 29 Dec, 2016 8:49 am
- Forum: Development
- Topic: v12 feature freeze at the end of the year
- Replies: 5
- Views: 6809
Re: v12 feature freeze at the end of the year
The Voodoo pics look really cool. Looking forward to playing around with it.
- Mon 26 Dec, 2016 2:54 am
- Forum: General
- Topic: PCem and a new PC
- Replies: 12
- Views: 12410
Re: PCem and a new PC
If possible may I ask what do you think of the AMD cpus FX-8350 or 8370 clocked at 4Ghz (turbo 4.2 and 4.3 Ghz respectively)? I know the core i7 is better, and even some core i5s run at 4Ghz, but I am just curious how these higher end AMD processors would perform against the benchmark cpus for PCem...
- Mon 26 Dec, 2016 12:59 am
- Forum: Development
- Topic: [Request] SCP (Supercard Pro) Support
- Replies: 9
- Views: 9302
Re: [Request] SCP (Supercard Pro) Support
I'm pretty sure flyers80 was talking about Supercard Pro format support on the host side, not the guest side. It's a floppy image format that samples disks at the flux level, similar to Kryoflux. I'm not sure exactly what's involved in adding support for those formats, but it kinda seems like way m...
- Mon 26 Dec, 2016 12:57 am
- Forum: General
- Topic: PCem and a new PC
- Replies: 12
- Views: 12410
Re: PCem and a new PC
I don't think Zen processors would make a huge difference with PCem, as those processors will have 8 cores / 16 threads but at relatively low clock, and as SarahWalker said, PCem needs a good single thread performance processor First, I'm going to apologize. This is going to be ranty; it's not aime...
- Sat 24 Dec, 2016 9:52 pm
- Forum: Development
- Topic: [Request] SCP (Supercard Pro) Support
- Replies: 9
- Views: 9302
Re: [Request] SCP (Supercard Pro) Support
Looks like a USB device. All that would be needed is a sufficient level of USB passthrough and the software for it.
Of course, "a small matter of..." rarely is a small matter.
Of course, "a small matter of..." rarely is a small matter.
- Sat 24 Dec, 2016 9:42 pm
- Forum: General
- Topic: PCem and a new PC
- Replies: 12
- Views: 12410
Re: PCem and a new PC
Or wait to see if Xen/Ryzen/Summit Ridge? is good.
- Sun 20 Nov, 2016 5:03 am
- Forum: General
- Topic: Is PCEm the only emulator of its kind?
- Replies: 11
- Views: 11097
Re: Is PCEm the only emulator of its kind?
I didn't write anywhere that Winuae's panel is nice. In fact, it's a rather incomprehensible mess. I also didn't mention mame as a reply to anyone, just as a mean of comparison to Pcem. My message was simply "PCem is architecturally awesome, deserves more press". That's all. (ps.: for the...
- Sun 20 Nov, 2016 1:08 am
- Forum: General
- Topic: Is PCEm the only emulator of its kind?
- Replies: 11
- Views: 11097
Re: Is PCEm the only emulator of its kind?
But all of those have one difference to 90s PC: They don't have a million and a half hardware combos, made by dozens of different companies, almost all of which had dubious adherence to spec. Hope not to go too off-topic: well, actually if you have a look at the most recent Winuae, you'll see that ...
- Sat 19 Nov, 2016 6:09 am
- Forum: General
- Topic: "Unable to control A20 line" or "A20 Line already enabled"
- Replies: 6
- Views: 7078
Re: "Unable to control A20 line" or "A20 Line already enable
Just confirming that this is a regression compared to PCem v10.1 on the same system, where A20 seems to be handled correctly. EDIT: Okay, this is getting weird. I was finally able to get HIMEM.sys working on PCem v11, but only on a certain BIOS in a certain very specific setup. Specifically, if I u...
- Sat 19 Nov, 2016 5:13 am
- Forum: General
- Topic: Is PCEm the only emulator of its kind?
- Replies: 11
- Views: 11097
Re: Is PCEm the only emulator of its kind?
DOSBox is easier to get into. WinUAE and Amiga Forever will get you up and running with Commodore nostalgia in less than a day, depending on how quick your download purchase goes. PCSXII and your LAN connection to your PS2 will probably have you running same-day as well. But all of those have one di...
- Thu 10 Nov, 2016 6:06 pm
- Forum: Development
- Topic: Building on Linux Mint... Error
- Replies: 3
- Views: 4896
Re: Building on Linux Mint... Error
Thanks, but that didn't work for me. The result I got was: <code> + aclocal main::scan_file() called too early to check prototype at /usr/local/bin/aclocal line 618. + autoheader + libtoolize ./reconfig.sh: 5: ./reconfig.sh: libtoolize: not found + automake --foreign --add-missing --copy Useless use...
- Sun 23 Oct, 2016 9:20 pm
- Forum: Development
- Topic: Building on Linux Mint... Error
- Replies: 3
- Views: 4896
Re: Building on Linux Mint... Error
Oh yeah. It's the Linux download on the main page.
- Sun 23 Oct, 2016 9:23 am
- Forum: Development
- Topic: Building on Linux Mint... Error
- Replies: 3
- Views: 4896
Building on Linux Mint... Error
Configure works. I have all the dependencies installed (using allegro 4.4.2, and the latest versions from apt-get) Make outputs the following: Making all in src make[1]: Entering directory '/home/bruce/Downloads/PCemV11Linux/src' source='386.c' object='pcem-386.o' libtool=no \ DEPDIR=.deps depmode=n...
- Thu 03 Dec, 2015 8:25 am
- Forum: Development
- Topic: 3DFX compatibility list
- Replies: 99
- Views: 157861
Re: 3DFX compatibility list
Interstate '76 Nitro - Clicked on "3Dfx" on the startup screen, and immediate Crash to Desktop.
What info do you need, and how would I get it?
What info do you need, and how would I get it?
- Mon 30 Nov, 2015 8:35 pm
- Forum: General
- Topic: Trident graphics (from downlods); display messed up
- Replies: 14
- Views: 12689
Re: Trident graphics (from downlods); display messed up
I was suggesting that it should be included in the readme. Perhaps I could have been more clear about that.SA1988 wrote:it doesn't mean it isn't emulated.A. Naim wrote:It's not listed in the readme.SA1988 wrote: there is, another one, called Phoenix S3 Trio64.
*Sneezes*
- Sun 29 Nov, 2015 8:07 pm
- Forum: General
- Topic: Daggerfall dag213.exe problem
- Replies: 0
- Views: 4263
Daggerfall dag213.exe problem
Following these instructions: http://www.uesp.net/wiki/Daggerfall:Running_Without_CD When running "dag213.exe" (the latest patch), I get the following error: unpacking c:\dagger\arena2\900c00y00.qbn DOS: Error creating file: This occurs whether I run it in DOS or Win98 SE (the OS I have in...