I got it to work. I loaded smartdrv before mscdex.

I tried it with dos 6.22 and an mounting the cdrom with pcem. Still have the same issue. I also tried a different machine type and it does the same thing.

I keep having a hard time with the keyboard with this machine. Sometime it works sometimes it doesn't. I can't really explain it.

I ran it on my i7 970 which is the same socket as your pc 6 cores 12 threads and it ran just fine. I even played a game of warcraft to on an emulated pentium 120mhz.

When running the installer for star trek unity it cannot detect the cdrom drive speed. I know it a vitual cdrom I am using but it should at least show some kind of transfer rate. I am unable to install the game.

Are the hyper-v machines running when you use pcem? If so it will affect performance. Try running pcem with the hyper-v machines powered off.

I have a spare i7 970 machine I can try it out tomorrow. What are the other specs of your machine?

PCem doesn't crash anymore on the pb570 thank Sarah.

So it seems like if I have any cd image mounted in pcem it crashes at boot. I installed poweriso and mounted a cd image in a virtual drive and then had pcem use that drive it works fine. It only happens when using the packard bell pb570.

SarahWalker wrote: ↑Sun 25 Feb, 2018 10:06 pm Could you attach the NVR file?

Sure here it is. It is worth mentioning I had deleted the nvr file and then tried again and it still happened.

I keep getting a crash on pcem with the pb570 board. It happened a few times with the original merge and after the pci bus fixes. I start the machine it post but when it goes to boot it crashes. It seems to happen when certain cdrom images are mounted at boot. I get the error in the pcem log "...

I keep getting a crash on pcem with the pb570 board. It happened a few times with the original merge and after the pci bus fixes. I start the machine it post but when it goes to boot it crashes. It seems to happen when certain cdrom images are mounted at boot. I get the error in the pcem log "D...

Can you add the gateway 2000 machine that is based on the zappa board? I think the bios is called aladd10.

Yes, I believe it does. Ok. Well if it does my pb600 which was in a Packard bell c110 had a riser card with 1 PCI slot and 2 ISA Slots. My friend had a packard bell that had a riser card that had more pci slots than the one mine had and it worked in my packard bell just fine. So would the riser car...

SarahWalker wrote: ↑Sat 24 Feb, 2018 1:39 pm Nope. Confusingly, PB570, 570, 590, 620, 630 and 650 are all basically the same Hillary design, with the same BIOS. PB600 is different, based on a VLSI chipset rather than an Intel one.

I know they are different I just meant does the hillard board use a riser card for the expansion slots?

Should also add this, before anyone stumbles into it by accident! The PB570 BIOS only seems to support 2 PCI cards - the PIIX chip supports 4 devices, one of which is taken by the onboard graphics. This should leave three slots, however the BIOS seems to screw up IRQ mapping for the third slot so i...

SarahWalker wrote: ↑Fri 23 Feb, 2018 10:00 pm

jznomoney wrote: ↑Wed 21 Feb, 2018 11:48 pm I am using the packard bell 570 machine and no matter what soundcard or use the rtl8029as network card I get an error about a pci irq conflict. There is no way to get any of these devices to work. Am I missing something?

Should be fixed in rev 1064.

Thanks for the fix. Works great now.

I am using the packard bell 570 machine and no matter what soundcard or use the rtl8029as network card I get an error about a pci irq conflict. There is no way to get any of these devices to work. Am I missing something?

I am using the packard bell 570 machine and no matter what soundcard or use the rtl8029as network card I get an error about a pci irq conflict. There is no way to get any of these devices to work. Am I missing something?

wrong thread sorry

SarahWalker wrote: ↑Mon 19 Feb, 2018 10:12 pm Packard Bell PB570 (the board used on the Legend 40xCD and friends) now emulated at rev 1055.

Does this motherboard have pci slots for other video cards? I'm only able to select the onboard video.

commit c68d358 is when the issue occurs.

This patch stopped working when the patch https://bitbucket.org/pcem_emulator/pcem/commits/f0db4b958b61c6706224f15880c3abaf0cafce70 . It keeps coming up pcem-model.o:model.c:(.text+0xf3d): undefined reference to `sl82c460_init' pcem-model.o:model.c:(.text+0x11fd): undefined reference to `acc2036_ini...

keyboard_xt.o:keyboard_xt.c:(.text+0x12e): undefined reference to `t1000_syskey' keyboard_xt.o:keyboard_xt.c:(.text+0x158): undefined reference to `t1000_syskey' keyboard_xt.o:keyboard_xt.c:(.text+0x178): undefined reference to `t1000_syskey' keyboard_xt.o:keyboard_xt.c:(.text+0x198): undefined refe...

This happens when compiling on windows too.

I am trying to install Microsoft Plus for Windows 95 Floppy Edition onto A Windows 95 machine. I have attached the PCem Config file and crash log.

is it possible for a future release to have a save state feature so if you wanted to close pcem you could restore the state the vm was in previously?

I've been using npcap from here https://nmap.org/npcap/

Is there a way to compile pcem under ubuntu with pcap support. Thanks in advanced for the help.

also I have to use task manager to close pcem.

I've attached a picture of it locked up. I've also attached the log file.