[BUG] NeXTSTEP/OPENSTEP install failure (SCSI)
Posted: Fri 04 May, 2018 12:31 am
[BUG] NeXTSTEP/OPENSTEP installation failure (SCSI)
NeXTSTEP 3.3 and OPENSTEP 4.2 fail to install when using the Adaptec SCSI controller with the following message:
PCem configuration:
Machine: AMI 486 clone
CPU: Intel i486DX2/66
Dynamic Recompiler: enabled
Memory: 16MB
Video: S3 Vision864
Sound: None
HDD: Adaptec AHA-1542C (IO 330, IRQ11, DMA 5, HBA SCSI ID 7)
FDD1: 3.5" 1.44M
FDD2: 5.25" 1.2M
HDD is on SCSI ID 0
CDROM is on SCSI ID 2
Mouse: Microsoft 2-button mouse (serial)
Network: None
OPENSTEP 4.2 will install correctly using Standard IDE with an ATAPI CD-ROM.
NeXTSTEP 3.3 and OPENSTEP 4.2 fail to install when using the Adaptec SCSI controller with the following message:
PCem configuration:
Machine: AMI 486 clone
CPU: Intel i486DX2/66
Dynamic Recompiler: enabled
Memory: 16MB
Video: S3 Vision864
Sound: None
HDD: Adaptec AHA-1542C (IO 330, IRQ11, DMA 5, HBA SCSI ID 7)
FDD1: 3.5" 1.44M
FDD2: 5.25" 1.2M
HDD is on SCSI ID 0
CDROM is on SCSI ID 2
Mouse: Microsoft 2-button mouse (serial)
Network: None
OPENSTEP 4.2 will install correctly using Standard IDE with an ATAPI CD-ROM.