Lotus 1-2-3
* What the effect of the bug was (ie more than "doesn't work")
I am unable to start Lotus 1-2-3. The program displays Division overflow
* Description of the error, if any
I installed 1-2-3 on an IBM XT hardrive. I start Lotus.com then I select 1-2-3. I see the Division overflow error on the screen.
I use DOS 2.1
* What software was running on the emulator at the time
Lotus 1-2-3 1.0
* What OS was running on the emulator at the time
IBM DOS 2.10
* What configuration was being used in the emulator
IBM PC XT- 8088@4.77 MHz - 128K RAM - 2x 360K Floppy - Hercules - 10 MB HDD
* Whether the dynamic recompiler was being used
No
* A screenshot of the issue, if possible
https://youtu.be/drCf-e-uMFA
The video closes with the problem
* Any additional information that seems relevant
Lotus 1-2-3 Division overflow on IBM XT
-
- Posts: 13
- Joined: Sun 19 Feb, 2017 9:57 pm
Re: Lotus 1-2-3 Division overflow on IBM XT
Copy protection maybe? Not sure.
Regardless if that's the cause DIVEFIX might help: https://www.pcorner.com/list/UTILITY/DIVEFIX2.ZIP/INFO
Regardless if that's the cause DIVEFIX might help: https://www.pcorner.com/list/UTILITY/DIVEFIX2.ZIP/INFO
-
- Posts: 13
- Joined: Sun 19 Feb, 2017 9:57 pm
Re: Lotus 1-2-3 Division overflow on IBM XT
Thank you Sir, I was not aware of this. Unfortunately the fix did not work. It is possible that I screwed up the install, I will try again. The other thing I can think of that this is related to the CPU bug I experienced with Flight Simulator.
Re: Lotus 1-2-3 Division overflow on IBM XT
Not sure if this will help. http://cd.textfiles.com/bthevhell/500/488/123a.unp . AFAIK Ver1.0A had copy protection, and you need to patch the exe for it to run on hard-drive
-
- Posts: 13
- Joined: Sun 19 Feb, 2017 9:57 pm
Re: Lotus 1-2-3 Division overflow on IBM XT
Indeed! This made the trick! It works now. Thank you very much for sending the solution!