Hi folks,
I can't save BIOS settings, the machine always starts with "cleared" BIOS settings, especially with 640 kb memory, no disc drive and at 4.77 MHz clock speed.
Do you have any suggestions? I didn't discover that with other machines. Where does PCem (linux) save the BIOS settings?
Greetz
Schneider Euro PC
- TheMechanist
- Posts: 71
- Joined: Mon 03 Apr, 2017 6:59 pm
- Contact:
Re: Schneider Euro PC
Linux saves it under ~/.pcem/nvr/
- TheMechanist
- Posts: 71
- Joined: Mon 03 Apr, 2017 6:59 pm
- Contact:
Re: Schneider Euro PC
... there are no save files for the machine hm ..
- TheMechanist
- Posts: 71
- Joined: Mon 03 Apr, 2017 6:59 pm
- Contact:
Re: Schneider Euro PC
btw. in terms of accuracy .. comparing topbench results with pcem (v13) shows that the emulated machines are about 25% faster than the benched real machines, mainly because of faster memory access, cpu speed seems to be nearly exact ..
Re: Schneider Euro PC
I've never found Topbench very reliable for any comparisons or benchmarking. My real computers, both fast and slow, would make matches with different generations entirely
- TheMechanist
- Posts: 71
- Joined: Mon 03 Apr, 2017 6:59 pm
- Contact:
Re: Schneider Euro PC
I know that benchmarking is a very controversial topic, but other benchmarks seem to point in the same direction .. at least if emulating special machines with a well defined hardware - not like clones or generic systems - the results should be comparable .. but 25% higher results and more is imho a huge difference .. this is not criticism, I really like PCem and the hard work for it, it's just a hint ..
Any idea why pcem doesn't save nvr for euro pc?
- SarahWalker
- Site Admin
- Posts: 2054
- Joined: Thu 24 Apr, 2014 4:18 pm
Re: Schneider Euro PC
Because I didn't know it had one?
- TheMechanist
- Posts: 71
- Joined: Mon 03 Apr, 2017 6:59 pm
- Contact:
Re: Schneider Euro PC
oh, okay .. don't know much about the special hardware of vintage computers .. it's not nvr, but I guess the 8088 machines saved the bios settings somewhere somehow .. found a book (Early Home Computers) which tells about "eeprom with similar functions like cmos nvram" to save BIOS settings .. atm at every startup of any of the 8088 machines (PCem v13) it's necessary to enter time and date and stuff like drive settings ..
- ruben_balea
- Posts: 191
- Joined: Mon 08 May, 2017 11:24 pm
- Location: Spain
Re: Schneider Euro PC
It has some kind of NVR and a clock too, the BIOS SETUP (Control+Alt+Esc) has time and date settings and says "Press ENTER-key to store information into SETUP-RAM"