v13 feature freeze end of Friday 13th October
- SarahWalker
- Site Admin
- Posts: 2054
- Joined: Thu 24 Apr, 2014 4:18 pm
v13 feature freeze end of Friday 13th October
v13 development seems to be going on forever, so I'm giving it an end date.
I'm aiming feature freeze for the end of Friday the 13th of October (thanks iwasaperson!). Any feature patches posted after then won't be considered for the release - obviously bugfixes are still welcome! That will then give a few weeks for bug fixing + general code hardening before a release sometime in November.
I'm aiming feature freeze for the end of Friday the 13th of October (thanks iwasaperson!). Any feature patches posted after then won't be considered for the release - obviously bugfixes are still welcome! That will then give a few weeks for bug fixing + general code hardening before a release sometime in November.
Re: v13 feature freeze end of Sunday 8th October
The more features the emulation has over v12, the better...
...and the more crippling my disk space will be.
Appreciate the work that has gone into it, Sarah.
...and the more crippling my disk space will be.
Appreciate the work that has gone into it, Sarah.
Re: v13 feature freeze end of Sunday 8th October
V13? This can't possibly be good... I'd suggest going straight to version 14...
But OTOH, it's amazing how far did PCem go since its early days... Congratulations and thanks!
But OTOH, it's amazing how far did PCem go since its early days... Congratulations and thanks!
Re: v13 feature freeze end of Sunday 8th October
Sweet cant wait.
Thanks to everyone for their hard work
Thanks to everyone for their hard work
-
- Posts: 31
- Joined: Sun 02 Nov, 2014 12:48 am
Re: v13 feature freeze end of Sunday 8th October
Couldn't make it just a few days later?
V13 freeze on Friday the 13th, which also happens to be in October.
V13 freeze on Friday the 13th, which also happens to be in October.
Re: v13 feature freeze end of Sunday 8th October
The S3TC patent expires on Oct 2. If someone can bring in working S3 Savage3D emulation between 2 and 8 it'd be crazy awesome timing
- BoisterousSleet75
- Posts: 39
- Joined: Fri 11 Aug, 2017 3:06 am
Re: v13 feature freeze end of Sunday 8th October
I agree, Despite being known for bad drivers quality.leilei wrote:The S3TC patent expires on Oct 2. If someone can bring in working S3 Savage3D emulation between 2 and 8 it'd be crazy awesome timing
Also, add Savage4 emulation would be nice.
Long Live Marxism-Leninism-Maoism! ☭
- SarahWalker
- Site Admin
- Posts: 2054
- Joined: Thu 24 Apr, 2014 4:18 pm
Re: v13 feature freeze end of Sunday 8th October
Ooh, nice idea!iwasaperson wrote:Couldn't make it just a few days later?
V13 freeze on Friday the 13th, which also happens to be in October.
- SarahWalker
- Site Admin
- Posts: 2054
- Joined: Thu 24 Apr, 2014 4:18 pm
Re: v13 feature freeze end of Friday 13th October
Savage4 is on my list for some point in the future, as I got given a Savage4 LT a while ago. Even I'm not mad enough to try to emulate it in the next two weeks though.
- BoisterousSleet75
- Posts: 39
- Joined: Fri 11 Aug, 2017 3:06 am
Re: v13 feature freeze end of Friday 13th October
Okay. Thanks!SarahWalker wrote:Savage4 is on my list for some point in the future, as I got given a Savage4 LT a while ago. Even I'm not mad enough to try to emulate it in the next two weeks though.
Long Live Marxism-Leninism-Maoism! ☭
Re: v13 feature freeze end of Friday 13th October
Hello everyone.
I would like thanks to the devs for PCEM.
I it's awesome PC emulator, mainly because it is possible to create Hard Disk image files and install software like in real machines of it's day.
Sorry if repeating information of older posts, i don't know if they were closed.
I recently discovered tath the Vtech Laser XT/3 has an 8086 Cpu not an 8088 like the Vtech Laser Turbo XT.
if i may ask, it is possible to change it to 8086?
Here is the Manual of the Laser XT/3 machine:
http://www.minuszerodegrees.net/manuals ... Manual.pdf.
on page 84 it says it has an 8086-1 cpu.
And the Manual of the Laser Turbo XT machine:
http://www.minuszerodegrees.net/manuals ... Manual.pdf
Has an 8088-1 instead of 8086, it is explained on page 14.
And ask if it is possible to add The Hercules Blend Patch, this pacth is not mine it was developed in 2010 by ripsaw8080 for dosbox.
But it was merged in Dosbox-Daum versions only which are no longer under development.
I had a Hercules graphics card with an amber phosphor monitor and it looks very close to the original.
I attached the diff file. I don't know if it's file is useful or if it can be modified to work with PCEM, because i'm not a programmer.
I added two screenshoots ther post called "Hercules Blend Patch",to compare the how it looks with and without the patch it can be enabled or disabled when need with a combination key SVN daum versions of Dosbox.
Thanks again!
I would like thanks to the devs for PCEM.
I it's awesome PC emulator, mainly because it is possible to create Hard Disk image files and install software like in real machines of it's day.
Sorry if repeating information of older posts, i don't know if they were closed.
I recently discovered tath the Vtech Laser XT/3 has an 8086 Cpu not an 8088 like the Vtech Laser Turbo XT.
if i may ask, it is possible to change it to 8086?
Here is the Manual of the Laser XT/3 machine:
http://www.minuszerodegrees.net/manuals ... Manual.pdf.
on page 84 it says it has an 8086-1 cpu.
And the Manual of the Laser Turbo XT machine:
http://www.minuszerodegrees.net/manuals ... Manual.pdf
Has an 8088-1 instead of 8086, it is explained on page 14.
And ask if it is possible to add The Hercules Blend Patch, this pacth is not mine it was developed in 2010 by ripsaw8080 for dosbox.
But it was merged in Dosbox-Daum versions only which are no longer under development.
I had a Hercules graphics card with an amber phosphor monitor and it looks very close to the original.
I attached the diff file. I don't know if it's file is useful or if it can be modified to work with PCEM, because i'm not a programmer.
I added two screenshoots ther post called "Hercules Blend Patch",to compare the how it looks with and without the patch it can be enabled or disabled when need with a combination key SVN daum versions of Dosbox.
Thanks again!
- Attachments
-
- hercules_blend.zip
- (1.63 KiB) Downloaded 413 times
- BoisterousSleet75
- Posts: 39
- Joined: Fri 11 Aug, 2017 3:06 am
Re: v13 feature freeze end of Friday 13th October
I'm agree that the Laser XT3 has 8086 CPU.Fenix77 wrote:Hello everyone.
I would like thanks to the devs for PCEM.
I it's awesome PC emulator, mainly because it is possible to create Hard Disk image files and install software like in real machines of it's day.
Sorry if repeating information of older posts, i don't know if they were closed.
I recently discovered tath the Vtech Laser XT/3 has an 8086 Cpu not an 8088 like the Vtech Laser Turbo XT.
if i may ask, it is possible to change it to 8086?
Here is the Manual of the Laser XT/3 machine:
http://www.minuszerodegrees.net/manuals ... Manual.pdf.
on page 84 it says it has an 8086-1 cpu.
And the Manual of the Laser Turbo XT machine:
http://www.minuszerodegrees.net/manuals ... Manual.pdf
Has an 8088-1 instead of 8086, it is explained on page 14.
And ask if it is possible to add The Hercules Blend Patch, this pacth is not mine it was developed in 2010 by ripsaw8080 for dosbox.
But it was merged in Dosbox-Daum versions only which are no longer under development.
I had a Hercules graphics card with an amber phosphor monitor and it looks very close to the original.
I attached the diff file. I don't know if it's file is useful or if it can be modified to work with PCEM, because i'm not a programmer.
I added two screenshoots ther post called "Hercules Blend Patch",to compare the how it looks with and without the patch it can be enabled or disabled when need with a combination key SVN daum versions of Dosbox.
Thanks again!
Long Live Marxism-Leninism-Maoism! ☭
Re: v13 feature freeze end of Friday 13th October
The only feature I think that could be in before the freeze is emulating the overscan area. Games like Commander Keen are missing their cyan borders and all those CRT shaders clip of the edge of text a little too much
Re: v13 feature freeze end of Sunday 8th Octob
Great, perhaps PCem can have codenames which Sarah can put in the title bar to make sure we don't forget. I was going to put some examples here, but I am not creative enough?iwasaperson wrote:Couldn't make it just a few days later?
V13 freeze on Friday the 13th, which also happens to be in October.
- SarahWalker
- Site Admin
- Posts: 2054
- Joined: Thu 24 Apr, 2014 4:18 pm
Re: v13 feature freeze end of Friday 13th October
And we're frozen! Thanks to everyone who's submitted patches, I'll work my way through the remaining ones over the next few days then get on with bug fixing.
Re: v13 feature freeze end of Friday 13th October
Sweet!!! Thank You Sarah!!!
Re: v13 feature freeze end of Friday 13th October
Can anyone tell me what feature freeze exactly means? I always assumed that Sarah wouldn't add any new features/bugs start of October, but it seems that this is not the case.
Re: v13 feature freeze end of Friday 13th October
It is the case. There hasn't been any more new features since the 13th of October. The last feature added was the AudioPCI. The prime focus is bugfixing and reporting to harden the release for a more stable state (which I know is a pretty alien concept in many many many many places)
Note that the speed patch I submitted earlier this month is not in mind for v13. It should be ignored in this stage of development.
Note that the speed patch I submitted earlier this month is not in mind for v13. It should be ignored in this stage of development.
Re: v13 feature freeze end of Friday 13th October
Thanks for clarifying.