Solaris x86 version 2.6 hangs while attempting to run the Configuration Assistant with multiple machine types.
This is too early in the boot process to use kadb but here is the message shown when the system hangs:
PCem configurations used:
Machine: AMI 486 clone (also tested with the Intel Premiere/PCI and the 430VX)
CPU: Intel i486DX2/66 (as well as a Pentium/66 and a Pentium/90)
Dynamic Recompiler: enabled
Memory: 64MB (also tested with 16MB)
Video: Trident TVGA8900D (as well as a Phoenix Trio64)
HDD: Adaptec AHA-1542C (IO 330, IRQ 11, DMA 5, HBA SCSI ID 7) (also tested with Standard IDE)
FDD1: 3.5" 1.44M
FDD2: 5.25" 1.2M
HDD is on SCSI ID 0 (Primary Master with Standard IDE)
CDROM is on SCSI ID 2 (Secondary Master with Standard IDE)
Mouse: Microsoft 2-button mouse (serial)
Discussion of development and patch submission.
1 post • Page 1 of 1