How can i set mfm hard with at fixed disk adapter?

Support and general discussion.
Post Reply
mmuiom
Posts: 6
Joined: Thu 05 Apr, 2018 11:54 am

How can i set mfm hard with at fixed disk adapter?

Post by mmuiom » Fri 01 Jun, 2018 7:08 am

Hi.

I tried to setting ibm 5170's mfm hard,but failed. i set machine as attached setting and run with ibm pc-dos 3.0.

and i've seen massage 162-system options not set-(run setup) (resume = "f1" key),
and i pressed f1 key.

and i just press enter when input date and time.

so,when i run fdisk, but machine says "no fixed disks present" and i can't progress...

i clearly set hard disk in config...

is it problem of system option setup?
Attachments
at.cfg
(1.51 KiB) Downloaded 8 times

User avatar
SarahWalker
Site Admin
Posts: 1542
Joined: Thu 24 Apr, 2014 4:18 pm

Re: How can i set mfm hard with at fixed disk adapter?

Post by SarahWalker » Fri 01 Jun, 2018 8:00 am

Yes, you need to run setup on the AT diagnostics disc and configure the hard drive there.

mmuiom
Posts: 6
Joined: Thu 05 Apr, 2018 11:54 am

Re: How can i set mfm hard with at fixed disk adapter?

Post by mmuiom » Fri 01 Jun, 2018 8:35 am

thank you :D

Post Reply