Tulip AT Compact
http://tulipgv.nl/tat1.htm

it's just a simple generic patch to see if Compaq LTE can run with a minimum code in PCem. its hard to write a complete patch for a whole single machine, especially from scratch. Didn't the Compaq LTE use a blueish grayscale CGA display with 4 shades of gray? The Compaq LTE 286 did use a grayscale V...

https://www.pcjs.org/disks/pcx86/diags/compaq/5.08/ I successfully applied this patch, thanks :-) One question: Could you tell me which version of COMPAQ DIAGNOSTICS you used to get screen shot #2 ("The Compaq (R) Personal Computer Diagnostics")? I tried "SETUP/DIAGNOSTICS Version 8.0...

re-tested against pcem latest commit 36890fc

re-tested against pcem latest commit 36890fc

re-tested against pcem commit 9745aa0

Thanks for patches. Few days ago I've tested ROMs for NEC motherboards with PCem-X, and Award BIOS for FM530 motherboard (it's PB equivalent is PB810) was launched successful. As that motherboard is based on Intel Triton II (430VX) chipset, I think it can be added to PCem easily (with minor tweaks)...

retested againt latest pcem commit 9745aa0 changes in the pcem mainline code, now give proper NCR PC4i harddisk support. no nessecary code changes in the previous NCR PC4i patch since its already supported by in pcem mainline code other than itty bitty changes to comply with latest commit. http://i....

issue partialy solved: xtide not detect hdd ---> after doing some clean build and compare with official pcem build, i think this issue is not a really issue until the official v13 build released :) http://i.imgur.com/XAoHZDa.png i can confim now, this is not an issue since i've test with the pcem s...

http://i67.tinypic.com/5o6wdj.jpg But HDDs aren't working with any other configuration of PCem 13.1! As I said already, it doesn't work even in Tandy and PC XT configurations that were working for years with older releases! i can reproduce this issue using stock pcem (https://pcem-emulator.co.uk/fi...

tested against latest pcem commit 9745aa0

patch requested by ArtiomWin [https://pcem-emulator.co.uk/phpBB3/memb ... ile&u=1661]

tested against latest pcem commit 9745aa0 patch requested by ArtiomWin [ https://pcem-emulator.co.uk/phpBB3/memberlist.php?mode=viewprofile&u=1661 ] http://i.imgur.com/YekCaj8.jpg front view: http://i.ebayimg.com/images/g/6jYAAOSwzRlaS-G0/s-l1600.jpg back view: http://i.ebayimg.com/images/g/8PkA...

I haven't looked into implementing the Compaq dual-scan CGA yet, but I was right that pressing CTRL + ALT + < will make it display correctly on the existing CGA: http://www.seasip.info/MIsc/Screenshots/pip_cga.png It would also work if you set the DIP switches to boot in 24x40 mode rather than 24x8...

JohnElliott wrote:It may work with a CGA chipset if you select CGA video timings using the 'external monitor' hotkey (CTRL + ALT + < ). Otherwise it'll be trying to drive the Compaq dual-scan monitor.

if you can help implement it, please do so.
if you can also help fix other issue in the patch, please do so.

tested against latest pcem commit 9de4df7 http://i.imgur.com/Lq2KgQv.jpg playable display adapter: -ati 18800 -ati 28800 -tseng et4000/w32p -tseng et4000ax -ega -oak oti-067 -paradise pvga1a -trident tvga8900d -trident tgui9440 -vga -wyse 700 playable harddisk controller: -[mfm] dtc 5150x -[mfm] fix...

SA1988 wrote:does this work with cga or mda?

my "tested display adapter:" list <-- tested list of "playable" display adapter, other than that just renders blank/not working/no display output.

tested against pcem latest commit 621d85d http://i.imgur.com/3KreB3l.png tested display adapter: -et4000/w32p -et4000ax -oak oti-067 -paradise pvga1a -s3 vision864 -trident tvga8900d -trident tgui9440 -vga tested hdd controller: -[mfm] dtc 5150x -[mfm] fixed disk adapter (xebec) tested floppy disk i...

tested against pcem latest commit 3d54cbb

tested against pcem latest commit 3d54cbb

issue partialy solved: xtide not detect hdd ---> after doing some clean build and compare with official pcem build,
i think this issue is not a really issue until the official v13 build released

Compaq Portable III Computer

https://www.youtube.com/watch?v=iAB6vmApNP0

Compaq Portable II - Tour and look inside!

https://www.youtube.com/watch?v=DqaWCobAbQ4

issue solved: boot to floppy drive with xt-ide enable will throw "Error 4h!" --> use correct xtide build version.

tested against pcem latest commit 67d13d6

issue: none atm

tested against pcem latest commit 67d13d6

issue: none atm

tested against pcem latest commit 67d13d6

issue:
-boot to floppy drive with xt-ide enable will throw "Error 4h!"
-xt-ide don't detect hdd

hello,

another simple patch from me, hope you like it.

hello,

another simple patch from me, hope you like it.

hello,

another simple patch from me, hope you like it.

optional:

kaypro 16 test file (6.678 bytes):
[Moderator : please do not link to copyrighted material]