Mr. bit, just to let you know, this crash i have is most likely Lubuntu bug in system itself , lots of people have same issue with many programs using Lubuntu :Segmentation fault , and system close application while it try access wrong memory area to prevent system crash. it is happenig often in Lub...

Hey bit, i did install Lubuntu (17.04 32bit) and PCem dependiences , i get src from your github and it compiles fine. But it still does crash, i did run doom under dos, but when i try quake sw version it crash and close right away, also when i try load windows ,as soon as i see windows loading scree...

Hi there, Dreamer did nice build guide which helped me https://pcem-emulator.co.uk/phpBB3/viewtopic.php?f=3&t=597&p=4696&hilit=build+guide#p4696 All types of Makefiles are in /src directory, to build on mingw in linux ,32bit , 64bit , wx-sdl2 version etc. but generally if you follow drea...

Thank You bit , i found the log file, and i can see that it is something wrong with my system, apparentely i do write this reply from puppy linux, it appears as i broke down my ubuntu, (firt time!!!). the PCem log says that it could not crate files, etc. so no wonder why it crahes, and PCem from com...

Thank You bit, it compiles with no problems now. I still have some problems running it, the previous version from you which i compiled on second page of this topic works great, however now it does not see roms folder in pcem directory, only if i copy it to usr/share/pcem/roms. at every start it alwa...

Hello everybody, i just downloaded the bit version from mborjesson/PCem-wx-SDL2 and i encounter a problem when trying to build it. I had to add CFLAGS: -std=gnu99 to go forward, before i had version in which and i dont have to add that, any way thats not a problem, it stops on same error as someone ...

i might be wrong but as far as i remember, the 3dfx display panel will be visible even if driver is wrong or none. You can delete this panel from uninstall programs in control panel, it will be shown as a 3dfx voodoo driver, or something like that , dont forget to uninstall it. and dont forget to ch...

It is too hot, also in Poole, ha ha.

Do you remember old motherboards, that You had to set IRQ's manually? Can that have caused the problem with Bios?

On bitbucket there is the actual list, but in general you should always read Readme.txt , its there for a reason.

@Roman S , what do you mean by that? "It expects various subdirectories to be present in the location of the emulator binary"? You must have this directories in the binary folder, did you put your PCem binary in your /usr/bin/ directory? if so, then thats why is asking you for this folders...

I build that too, works very nice.
Thank You!

@andr25352 good catch, this button does not work here either. I guess it needs some TLC , and it would be fine.

@Bit Well Done, it works Flawlessly!!! right click, it bring menu , from this menu i can bring machine window and Pause emulation. Everything is Available through right click menu!!!! The config window works great, now i have 430vx and 486ami machines with two separate hdd images , quickly accessibl...

Hi Bit, i checked Your new build, it compiled no problems . the new config folder and saving config seems to work well and its quite nice, i can without any hassle now save multiple configurations. But , there is a problem i can not bring menu , and by pressing ctrl-alt-pgdn it goes full screen, whe...

My apologies Sarah, i didn't thought that through. I have seen You on that Many times and i completely forgot. Really sorry, not meant to cause troubles. For any one who would like to take a look at this strange not working under PCem version, i can advice to search for it on site called ***********...

Woow, i Got it all. @omarsis81 i did download SW version and it works fine, so i did download again full ver. of quake from *********** and blah!!!! it works!!! i thought WTF? have i done something wrong while copying it? so i traced back the source which i used to download both versions and downloa...

@leilei , i (stupidly?) did attempt 64-bit build but only only once at very beginning of my Linux adventure, since then never again. The V12 official linux version was a freshly downloaded , extracted and build first time by make -f Makefile.linux32, beside i did not build official v12 windows ver. ...

that is the config from v12 linux version from PCem site: gameblaster = 0 gus = 0 ssi2001 = 0 voodoo = 0 model = 38 cpu_manufacturer = 0 cpu = 3 cpu_use_dynarec = 1 cpu_waitstates = 0 gfxcard = 17 video_speed = 2 sndcard = 7 cpu_speed = 13 has_fpu = 1 disc_a = disc_b = mem_size = 131072 cdrom_drive ...

Ok. so there is again. i did just now download v12 windows version from PCem site , also v12 linux version and i did build and sdl2wx version by Bit. The config as follows: intel Advanced/EV, pentium 100/66 recompiler, Virge DX/GX, video: Fast 16bit, sb16, floppy A 1.44, ps2 mouse , 128Mb RAM, (only...

I looked through this forum and did not find these, so maybe i m doing something wrong but quake 1 wont start under dos. screen shoot is from Malice quake ver, but original Quake difference is only in : Call frame traceback EIPs: 0x0003c928 the rest is the same. Its fine under Windows but it wont st...

@AmatCoder Ta Daa!!! grandpa Google help me in ubuntu 14.04 : wget http://libsdl.org/release/SDL2-2.0.4.tar.gz -O - | tar xz cd SDL2-2.0.4 ./configure make sudo make install And it works great , compiled first time, just had to remove 2.0.2 before this. and had to rename 430vx bios to be available. ...

@AmatCoder thank You, And yes i use 14.04 LTS, bahh!!!! i should go for 16 i guess. i checked Synaptic and only 2.0.2 is avaliable, ehh. BTW Thanks to PCem i did compile linux version of Return To Castle Wolfenstain!!!! The more i will play with PCem the more i will know, i think. Thank You again fo...

@AmatCoder Thank you very much,i m learning thanks to You guys, and i m grateful for it, now it goes nearly to the end but , again i got errors: wx-sdl2-display.o: In function `render': wx-sdl2-display.c:(.text+0xe17): undefined reference to `SDL_WarpMouseGlobal' wx-sdl2-display.c:(.text+0xefc): und...

i got same thing as Leilei : wx-sdl2-video.c:311:9: error: 'for' loop initial declarations are only allowed in C99 mode wx-sdl2-video.c:311:9: note: use option -std=c99 or -std=gnu99 to compile your code and i dont know how to change script or else. I m trying to build this on ubuntu 16 and so far t...

Very strange, it should work. maybe you right, cos on Sarah versions its fine. lets wait for Bit answer.

Buka, i think you installed win98 and you let windows to detect and install drivers, right? windows drivers install hardware but not glide libraries, take one of this drivers http://www.falconfly.de/voodoo2.htm and install them. i dont know what kind of drivers are this ones , are they with setup or...

"Yes, because Bochs and Qemu are totally known for being user friendly..." Sarah, you are more than right, on the spot. Some say that PCem is "fairly" difficult to configure, hm? i use to play with Bochs and Qemu and... uff, its easy once you learn, but PCem is by far EASY-est to...

The power buton is good idea, i think. Personally it bothers me a litlle when i fidlle around with config and often PCem start to boot, which leaves me no choice than wait and close windows, or reset and risk losing some data , and scandisk will run everytime after reset. Just that, BTW Thank You Sa...

resle, thank you , good to know, but how did u bring config? ctrl+f2? default is shift+f2 and none of it works. and d3d9 crash right away. i run it on win10 64bit and hd3000 , maybe the shitty card is a problem.