Search found 174 matches
- Tue 25 Aug, 2015 1:07 am
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
My testing was done on Win98SE. I had to manually install a NE2000 (no PnP detection), let it configure itself, and then manually configure it after (IRQ 10, address 300). Left it at DHCP. 2 soft reboots followed by one hard reboot were had and it was working. Maybe it's the machine type? I don't k...
- Tue 25 Aug, 2015 1:06 am
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
How do I get inbound connection to a PCEM machine? I have two PCEM machines on two separate PCs. How can one talk to the other say over a NETBIOS/CIFS share? Also, can I do IPX using this SLIRP method? Inbound connections are an api call, so I'd need to tackle the win32 UI to setup some redirects. ...
- Mon 24 Aug, 2015 4:50 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
Glad to hear!!therock247uk wrote:Got this working on my windows 10 host on a wlan...
http://i.imgur.com/bTZbnOQ.png
- Mon 24 Aug, 2015 4:50 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
Oh I just noticed something, On reboots it'll stop working. It runs best from a 'clean start'... I think when the 'vlan' code gets kicked I need to force slirp to stop/start, even though the pcap code didn't disconnect/reconnect... Use DHCP, if the stack has issues you'll get a DHCP failure so you'l...
- Mon 24 Aug, 2015 4:45 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
I have Windows 95, with IE 3.0 along with Comic Chat, and the Mail/News reader. I've downloaded Comic Chat, and news pretty quickly and everything is working on 95. The networking seems fine to me. Do you have a local web server or something to telnet to?
- Mon 24 Aug, 2015 4:23 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
I just installed Windows 95, since I have it handy, and copied in Internet Explorer 3, and it works fine... I let the adapter configure via DHCP. try dhcp?
- Mon 24 Aug, 2015 3:57 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
current settings: IP 10.0.2.15 mask 255.255.255.0 gateway 10.0.2.2 DNS 10.0.2.3 I can ping the 10.0.2.2 and 10.0.2.15... but ping 10.0.2.3 turns out timed out That is the way it works. Try and connect to something. I got QuakeWorld and Quake2 to work! Now my laptop is on Ethernet and I disconnect W...
- Mon 24 Aug, 2015 3:22 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
but it seems not to work on Windows 98... IP config: IP 10.0.2.15 mask 255.255.255.0 gateway 10.0.2.2 DNS 8.8.8.8 Change the DNS to 10.0.2.3 If you ping say google.com you should get it to resolve. nslookup gives better results to be honest. The google multicast DNS of 8.8.8.8 won't work properly f...
- Mon 24 Aug, 2015 3:20 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
That is the way it works. Try and connect to something. I got QuakeWorld and Quake2 to work!startmenu wrote:current settings:
IP 10.0.2.15
mask 255.255.255.0
gateway 10.0.2.2
DNS 10.0.2.3
I can ping the 10.0.2.2 and 10.0.2.15... but ping 10.0.2.3 turns out timed out
- Mon 24 Aug, 2015 3:19 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
Neozeed, I have one question. Does your SLiRP build support the WLAN environment? Just curious to ask. You can *ONLY* ping 10.0.2.2 It works in WLAN setups, I am writing this on a MacBook Air, and running it through wine... Although I test on my Windows machine when I'm in the office, but that is a...
- Sun 23 Aug, 2015 5:46 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
Again, all SLiRP does is emulating an Internet connection, not complete networking. If PCem is going to emulate a network adapter, it should be able to provide all network services, like a real network adapter would. The problem is that you get people trying to shove pcap onto wifi adapters that'll...
- Sun 23 Aug, 2015 4:51 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
apparently 60*TIMER_USEC never really fires. I dont know how on earth I missed that, must have not actually tested that binary. So I'm trying 120 as a magical value. Works great for telnet and pentiums. but for some reason a 486 can't run telnet32. weird. I need to load up QuakeWorld or Quake2.. Giv...
- Sun 23 Aug, 2015 3:59 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: Networking discussion
Ive gotten it to work like once with lots of playing around using the loopback adapter even then its a pain. slirp is the way to go. Yeah, basically you use the loopback, and then NAT onto your wifi adapter. I used to do the same with VPC 2004 ... 11 years ago. But it's much easier to hit the 'user...
- Sun 23 Aug, 2015 3:40 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: v10 rough timetable
Like I said, Win10Pcap is not mentioned to be compatible with Windows Vista. I attempted to installed and stated that the operating system (Windows Vista) is not supported...so, I will have to stick with WinPcap. Sorry. Then use WinPCap on Vista and Win10PCap on 10. Also, I have no problems with it...
- Sun 23 Aug, 2015 12:00 pm
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: v10 rough timetable
Thanks to startmenu for posting that diff, it made it easier to see what goes where... I didn't touch the resource files, but I do have a preliminary slirp version working. http://i.imgur.com/7WRyN09.png I can't get this bit to work for the life of me.. int delay=60*TIMER_USEC; timer_add(slirp_tic,&...
- Sun 23 Aug, 2015 12:11 am
- Forum: Development
- Topic: Networking discussion
- Replies: 228
- Views: 219937
Re: v10 rough timetable
Another "Feature" I'd like to see is that PCem "remembers" more intelligently where stuff is stored. IE Hdd's is under I:\Emu\PCem\Hdd and Floppies is under G:\Backup\Emu\PC\. would be great if you use the floppy selector ant it opens where last you opened a floppy, and the same...
- Wed 08 Apr, 2015 2:16 am
- Forum: General
- Topic: Can we have an OS X port, please?
- Replies: 5
- Views: 7669
Re: Can we have an OS X port, please?
for what it's worth, it runs on WIne..
- Wed 01 Apr, 2015 10:43 am
- Forum: General
- Topic: Issue with the AMI386 with NVram
- Replies: 0
- Views: 4202
Issue with the AMI386 with NVram
So I deleted the ami386.nvr file, and 8.1 and beyond just hand while initializing the BIOS. I've tried 1MB of RAM to 10MB, MDA/CGA/EGA and various VGA cards, no HD's 2 HD's, CD-ROM or no CD-ROM and it doesn't seem to matter. But if I have a prior ami386.nvr file, it'll boot up and work without any h...
- Tue 10 Feb, 2015 1:07 pm
- Forum: General
- Topic: Coherent 4.2.10 crashes on PCem
- Replies: 2
- Views: 4925
Re: Coherent 4.2.10 crashes on PCem
awesome, thanks!!
- Wed 14 Jan, 2015 5:38 am
- Forum: General
- Topic: Coherent 4.2.10 crashes on PCem
- Replies: 2
- Views: 4925
Coherent 4.2.10 crashes on PCem
I can provide a hard disk image here (sorry you have to deal with my retarded security, just guess a userid/password, and you'll get an error, but the userid and password is on the error page). When attempting to boot, I get the following error message from Coherent: CPU Bug: Spurious GP Fault on Ir...
- Wed 10 Dec, 2014 7:01 am
- Forum: General
- Topic: PCem crashes on touchscreen only tablet Bug
- Replies: 2
- Views: 4361
Re: pcem crashes on a hp stream 7
I had it working on my Pipo w4 (its basically the same thing) but now it crashes. I'm pretty sure its because of the mouse (or lack of). Attach a Bluetooth mouse & keyboard, and see how that goes.
- Sun 30 Nov, 2014 5:46 am
- Forum: General
- Topic: So a friend of mine has a bunch of gravis docs
- Replies: 0
- Views: 4344
So a friend of mine has a bunch of gravis docs
SDK's source etc etc... Is there a way I can get this information to you?
Thanks!
(edit)
https://mega.co.nz/#F!3ZtVzLRD!U3o5rruEXpLPiGm4O4Nv8A
Thanks!
(edit)
https://mega.co.nz/#F!3ZtVzLRD!U3o5rruEXpLPiGm4O4Nv8A
- Tue 08 Jul, 2014 5:13 am
- Forum: General
- Topic: I have no mouth, and I must scream
- Replies: 1
- Views: 5669
Re: I have no mouth, and I must scream
I think I solved my own issue by trying more sound card combinations... I went with the ultrasound for midi, and a soundblaster pro v2 for audio. The Ultrasound I configured with : SET ULTRASND=240,3,3,7,7 SET ULTRADIR=C:\ULTRASND And I set the IRQ of the sound blaster to 5, so it wasn't trying to s...
- Tue 08 Jul, 2014 4:47 am
- Forum: General
- Topic: I have no mouth, and I must scream
- Replies: 1
- Views: 5669
I have no mouth, and I must scream
I've been trying to run this under PCem with no success... It always crashes or locks up. I tried the latest source dump on git ( PCem-bd2ab065dd81.zip ) and the best info I could find was this: http://i.imgur.com/najWD9a.png DOS/16M error: [0] involuntary switch to real mode then a minute later: No...