I acquired this HP Brio 8014 computer which is 430VX chipset based with a Phoenix BIOS.
I think this might be a good add to PCem since there is no computer with the 430VX chipset.
Is had a nice Brio splash screen
I know Sarah is busy with the recompiler, but is there anyone else who could make a patch?
There is some urgency in this as you can see in the pic some capacitors blew and there is leakage, I fear the PC could stop from working any day soon.
I dumped the BIOS with Uniflash, but I'm not sure if I done it correctly as the BIOS is not directly supported by Uniflash.
Is the BIOS the one in the last pic? It reads LHF R00.12 MX
New computer? HP Brio 8014 - Help needed
Re: New computer? HP Brio 8014 - Help needed
I'm trying to define a new model in model.c but the Intel Southbride PIIX3 is in slot 07h which I think is uncommon. Should I modify one of the lines here? or is it pci.c?
void at_brio_init()
{
at_init();
pci_init(PCI_CONFIG_TYPE_1);
pci_slot(0x11);
pci_slot(0x12);
pci_slot(0x13);
pci_slot(0x14);
i430vx_init();
piix_init(7, 18, 17, 20, 19, i430vx_reset);
fdc37c932fr_init();
device_add(&intel_flash_bxt_device);
}
PCI slot 07 is vendor 8086 (Intel) device 7000 (PIIX3)
void at_brio_init()
{
at_init();
pci_init(PCI_CONFIG_TYPE_1);
pci_slot(0x11);
pci_slot(0x12);
pci_slot(0x13);
pci_slot(0x14);
i430vx_init();
piix_init(7, 18, 17, 20, 19, i430vx_reset);
fdc37c932fr_init();
device_add(&intel_flash_bxt_device);
}
PCI slot 07 is vendor 8086 (Intel) device 7000 (PIIX3)
- SarahWalker
- Site Admin
- Posts: 2054
- Joined: Thu 24 Apr, 2014 4:18 pm
Re: New computer? HP Brio 8014 - Help needed
Look at the parameters being passed to piix_init()...